Category 5 SFTP 100 Ohm Modular Cords

Description

HCS DataLink 100 modular cord series consists of 100 Ohm impedance, 4-pair overall foil + braid (SFTP) shielded terminated cords for work area, jumper and patching in local area networks (LANs).
HCS DataLink 100 modular cords feature a unique termination method, combining strength relief injection molding into the RJ-45 plug with a removable boot. This design provides the advantages of both molded and non-molded terminations. 
The HCS DataLink 100 modular cords have been designed to provide mated performance that exceeds the TIA/EIA-568-A Category 5 requirements in shielded cabling systems where improved noise immunity is required.
The HCS DataLink 100 modular cords can be used with either T568A or T568B modular jacks. 
The standard color is Grey RAL 7032, but they are available in 10 different jacket colors and supplied with boots that match the color of the cord. 
Applications
HCS DataLink 100 modular cords can be used for connections in telecommunications outlet, MUTO, consolidation point, patch panel and terminal equipment.
HCS DataLink 100 modular cords support the following protocols:
  • ATM 155
  • TP-PMD
  • 100BASE-T "Fast Ethernet"
  • 100BASE-T2
  • 100BASE-T4
  • 100BASE-TX
  • Token Ring 100 Mbps
  • ATM 52
  • ATM 25
  • 10BASE-T Ethernet
  • Token Ring 4 Mbps and 16 Mbps
  • Broadband and Baseband Video
  • ISDN Basic and Primary Access
  • 1BASE-5 Starlan
  • ISALAN
  • ITU V.21 and X.11
Qualifications and Approvals

HCS DataLink 100 modular cords are tested and verified for full compliance with the following standards:

  • Category 5 according to ANSI/TIA/EIA-568-A
Benefits & Features
  • Unique double termination method - providing the advantages of both molded and non-molded terminations.
  • Exceptional material properties and cable design - providing the highest degree of reliability.
  • High Return Loss and NEXT Loss values - providing low BER (Bit-Error-Rate) in all applications. 
  • Extremely high pair-balance - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity.
  • End-to-end double-shield continuity - Providing a low transfer impedance, a high coupling-attenuation and improved EMC.
  • Revolutionary pair lay scheme - providing an extremely low delay skew. 
  • Smooth and limp jacket - proving comfortable cord handling.
  • Unique DoubleSafe™ Quality Assurance Program  providing lowest rejection rate available.
Physical and Mechanical Properties
4 color-coded, unshielded twisted pairs cabled together and overall taped-wrapped with a polyester tape, shielded with an
aluminum foil plus a tin-coated copper braid and overall jacketed.
Both cable ends terminated with fully shielded modular plug connectors conforming to IEC 60603-7-3.
Basic Cable Conductor : Stranded, 26 AWG, 7x0.16 mm, bare annealed copper
Wire Insulation : Polyolefin
Number of insulated conductors : 8, twisted in 4 pairs.
Color Code of Pairs : Blue x White/Blue, Orange x White/Orange, Green x White/Green,
Brown x White/Brown.
Overall Tape Wrap : Polyester tape, providing 100% coverage.
Overall inner shield : Polyester-aluminum foil (foil face out), providing 100% coverage.
Overall outer shield : Tinned-copper braid, providing 65% coverage, laid over the aluminum foil.
Outer Jacket and boots: LS0H Halogen free flame retardant or PVC compound.
Standard Jacket and boot Color : Light Gray RAL 7032. Other colors available upon request.
Standard Surface Marking : Includes HCS P/N, cable description, Meter mark and Batch Number.
Cable to plug tensile strength: 9 Kgf (90N) min.
Pulling force : 1 Kgf (10N) max.
Storage Temperature : -20 to +80C
Durability : 750 mating cycles
Cable OD: 5.7 mm nom.
Bend radius: 23 mm min.
Plug housing material: Polycarbonate. 
Plug contact material: 50 micro-inches gold plating over 100 micro-inches nickel plated copper
alloy. 
Temperature operating range : -20 to +60C
Flame Test : UL 1581 VW-1 and IEC 332-1.
Halogen content in LS0H cables Null.