 |
|
Category
6 UTP 100 Ohm Modular Cords
|
|
|
| Description |
|
HCS
DataLink 250 modular cord series consists of 100 Ohm
impedance, 4-pair UTP terminated cords for work area,jumper
and patching in local area networks (LANs).HCS DataLink 250
modular cords feature a unique termination method, combining
strength relief injection molding into the RJ-45 plug with a
removable boot. This design provides the advantages of both
molded and non-molded terminations.HCS DataLink 250 modular
cords exceed all TIA/EIA-568-B.2 and ISO/IEC-11801 (2nd
Edition) Category 6 requirements and are specially designed to
be backward compatible with all Category 5 and Category 5e
jacks.The HCS DataLink 250 modular cords can be used with
either T568A or T568B modular jacks.The standard color is Grey
RAL 7035,but they are available in 10 different jacket colors
and supplied with boots that match the color of the cord.
|
| Applications |
|
HCS DataLink 250 modular cords support all presently available and future LAN applications, including the
following protocols:
|
- 1000BASE-TX Gigabit Ethernet Over
Category 6 TIA/EIA-854
- 1000BASE-T Gigabit Ethernet
- ATM 155
- TP-PMD
- 100BASE-T "Fast Ethernet"
- 100BASE-T2
- 100BASE-T4
- 100BASE-TX
- Token Ring 100 Mbps
|
- ATM 52
- ATM 25
- 10BASE-T Ethernet
- Token Ring 4 Mbps and 16 Mbps
- Broadband and Baseband Video
- ISDN Basic and Primary Access
- 1BASE-5 Starlan
- ISALAN
- ITU V.21 and X.11
|
| Qualifications and Approvals
|
|
HCS DataLink 250 Cables are tested and
verified for full compliance with the following standards:
- Category 6 according to ANSI/TIA/EIA-568-B.2-1
- Category
6
according to ISO/IEC-11801 (2nd Edition)
|
| Benefits & Features
|
- Testing every cord prior to shipment - providing the highest degree of quality
assurance.
- Unique double termination method -
providing the advantages of both molded and non-molded terminations.
- Exceptional material properties and
cable design - providing the highest degree of reliability.
- High Return Loss and NEXT Loss values - providing low BER
(Bit-Error-Rate) in all applications.
- Extremely high pair-balance -
providing excellent EMC (Electro Magnetic Compatibility), minimizing
radiation and maximizing noise immunity.
- Revolutionary pair lay scheme -
providing an extremely low delay skew.
- Smooth and limp jacket - proving comfortable
cord handling.
- Unique DoubleSafe™ Quality
Assurance Program providing lowest rejection rate available.
|
| Physical and Mechanical Properties
|
4
color-coded, unshielded twisted pairs cabled together and
overall jacketed.
Both cable ends terminated with unshielded modular plug
connectors conforming to IEC 60603-7-4.
|
| Basic
Cable Conductor : |
Stranded,
24 AWG, 7x0.20 mm, bare annealed copper |
| Wire
Insulation : |
Polyolefin
|
| Number
of insulated conductors : |
8,
twisted in 4 pairs. |
| Color
Code of Pairs : |
Blue
x White/Blue, Orange x White/Orange, Green x White/Green,
Brown x White/Brown. |
| Overall
Tape Wrap : |
None. |
| Overall
shield : |
None. |
| Drain
wire : |
None. |
| Outer
Jacket and boots: |
LS0H
Halogen free flame retardant or PVC compound. |
| Standard
Jacket and boot Color : |
Light
Gray RAL 7035. Other colors available upon request. |
| Standard
Surface Marking : |
Includes
HCS P/N, cable description, Meter mark and Batch Number. |
| Cable
to plug tensile strength: |
9
Kgf (90N) min. |
| Pulling force : |
1
Kgf (10N) max. |
| Storage Temperature : |
-20
to +80C |
| Durability
: |
750
mating cycles |
| Cable
OD: |
5.7
mm nom. |
| Bend
radius: |
23
mm min. |
| Plug
housing material: |
Polycarbonate,
conforming to UL 94 V-0. |
| Plug
contact material: |
50
micro-inches gold plating over 100 micro-inches nickel
plated copper alloy. |
| Temperature operating range : |
-20
to +60C |
| Flame
Test : |
UL
1581 VW-1 and IEC 332-1. |
| Halogen
content in LS0H cables |
Null. |
|
|
|
