Category 6 S/STP 100 Ohm Modular Cords

Description
HCS DataLink 250 S/STP modular cord series consists of 100 Ohm impedance, 4-pair S/STP terminated cords for work area, jumper and patching in local area networks (LANs) ETL Verified at the component level.
HCS DataLink 250 S/STP modular cords feature a unique termination method, combining strength relief injection molding into the RJ-45 plug with a removable boot. This design provides the advantages of both molded and non-molded terminations. 
HCS DataLink 250 S/STP modular cords exceed all TIA/EIA-568-B.2-1 and ISO/IEC-11801 (2nd Edition) Category 6 requirements and are specially designed to be backward compatible with all Category 5 and Category 5e jacks.
HCS DataLink 250 S/STP modular cords can be used with either T568A or T568B modular jacks. 
The standard jacket color is Grey RAL 7035. 10 different jacket & boot colors are available upon request.  
Applications
HCS DataLink 250 S/STP modular cords support all presently available and future LAN applications, including the following protocols:
  • 1000BASE-TX Gigabit Ethernet Over Category 6 TIA/EIA-854
  • 1000BASE-T Gigabit Ethernet
  • ATM 155
  • TP-PMD
  • 100BASE-T "Fast Ethernet"
  • 100BASE-T2
  • 100BASE-T4
  • 100BASE-TX
  • Token Ring 100 Mbp
  • ATM 52
  • ATM 25
  • 10BASE-T Ethernet
  • Token Ring 4 Mbps and 16 Mbps
  • Broadband and Baseband Video
  • ISDN Basic and Primary Access
  • 1BASE-5 Starlan
  • ISALAN
  • ITU V.21 and X.11
Qualifications and Approvals
All HCS DataLink 250 S/STP terminated cords are tested at the component level and officially ETL verified for full compliance with ANSI/TIA/EIA-568-B.2-1 Category 6.
Benefits & Features
  • Testing every cord prior to shipment - providing the highest degree of quality assurance.
  • Unique double termination method - providing the advantages of both molded and non-molded terminations.
  • Exceptional material properties and cable design - providing the highest degree of reliability.
  • High Return Loss and NEXT Loss values - providing low BER (Bit-Error-Rate) in all applications. 
  • Individual foil + overall copper braid - providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity.
  • Revolutionary pair lay scheme - providing an extremely low delay skew. 
  • Smooth and limp jacket - proving comfortable cord handling.
  • Unique DoubleSafe™ Quality Assurance Program  providing lowest rejection rate available.
Physical and Mechanical Properties
4 color-coded,  individually foil shielded twisted pairs cabled together, overall shielded with tin-coated copper braid and overall jacketed.
Both cable ends terminated with fully shielded modular plug connectors conforming to IEC 60603-7-5.
Basic Cable Conductor Stranded, 26 AWG, 7x0.16 mm, bare annealed copper
Wire Insulation Polyolefin
Number of insulated conductors 8, twisted in 4 pairs.
Color Code of Pairs Blue x White/Blue, Orange x White/Orange, Green x White/Green, Brown x White/Brown.
Individual pair shield Polyester-aluminum, foil face out, providing 100% coverage.
Overall shield Tin-coated copper braid, providing 50% min. coverage.
Drain wire None.
Outer Jacket  and boots LS0H Halogen free flame retardant or PVC compound.
Standard Jacket Color Light Gray RAL 7035. Other colors available upon request.
Boot Color Red.
Standard Surface Marking Includes HCS P/N, cable description, Meter mark and Batch Number.
Cable to plug tensile strength 9 Kgf (90N) min.
Pulling force 0.7 Kgf (7N) max.
Storage Temperature -20 to +80C
Durability 750 mating cycles
Cable OD 6.2±0.3 mm nom.
Bend radius 25 mm min.
Plug housing material Polycarbonate. 
Plug contact material 50 micro-inches gold plating over 100 micro-inches nickel plated copper alloy. 
Temperature operating range -20 to +60C
Flame Test IEC 60332-1.
Halogen content in LS0H cables Null